Low Heat Temperature Strip
$4.50
Brewing at the correct temperature, either with your brew water or with your milk is essential to optimizing your results.
Similarly, buy a Low-Heat Temperature Strip, with a range of 77 to 149 °F / 25 to 65 °C to ensure that the milk in your frother or steamer has reached the optimal point for latte art.
Take control of your brew and improve repeatability of your tasty shots by placing these easy to use, easy to read temperature strips on your brew heads and steamers!
Comes with one (1) customizable temperature strip. Dimensions are 2.25 x .5 inches.
*Prior to application, ensure surface is clean and dry. During application, ensure that strip lays flat across face of cylinder or other surface and that no gaps or air pockets are present where water could seep in between surface and strip
As the gauge warms to the response temperature, the window starts with a tan or reddish-brown and continues to change to green.
-
TAN window is above actual temperature reading
-
GREEN window is actual temperature reading
-
BLUE window is below actual temperature reading
-
Moisture Resistant: Self-Adhesive Backing
- Estimated Shelf Life of Adhesive: 2 yrs, but will vary depending on application and use
| Weight | .01 lbs |
|---|---|
| Dimensions | 7.25 × 12 × .5 in |
| Temperature Range |
High Heat – Brew Heads, Low Heat – Steamers & Frothers |
| Temperature Accuracy |
+/- 2°C |